The BASE motor installed on the gate is invisible, choosing the elegance and artistic grandeur of the swing gate (2 or 1 leaf).

The BASE automation is electromechanical, sealed with oil-tight oil, its application optimizes the installation space, taking into account its rectangular geometry, it is possible to apply in several ways, allowing not to damage old and existing sills.

The BASE motor is housed in a robust galvanized housing (stainless steel only on request) that is buried close to the gate pillar at ground level. The installation of this automation requires a pre-preparation, projecting the space of the box and the drainage of rain and domestic water. But no cap is needed.

The BASE motor has a release system that can be operated on both sides (inside and outside the gate) with a key.